Transcend DrivePro 200
COOL People Love to Share:

Recently I get a Car Video Recorder Transcend DrivePro 200, thanks to Transcend Co. for sponsored me a unit for review.

In this article, I will share about how I DIY to install the Car Video Recorder DrivePro 200 in my Toyota Vios without caused any messiness in the interior of the car. Below are the photos of the Transcend DrivePro 200 unit that I received:

Transcend DrivePro 200 Packaging

Transcend DrivePro 200 Packaging

Transcend DrivePro 200 in Packaging

Transcend DrivePro 200 in Packaging

Transcend DrivePro 200  Package

Transcend DrivePro 200 Package Items

Now we are going to DIY install the Transcend DrivePro 200 into the Toyota Vios.

Step by step to DIY Car Video Recorder Transcend DrivePro 200 installation

1) To assure we affix the right position of the DrivePro 200 car video record on the windscreen, we started the DIY on the Transcend DrivePro 200 itself first instead started from the wiring. We attach the car mounting bracket to the DrivePro 200.

Attach the car mounting bracket to the DrivePro 200

Attach the car mounting bracket to the DrivePro 200

2) Then find the right position on the car windscreen, where the DrivePro 200 able to capture the front view without causing any obstruction to the driver.

Toyota Vios front windscreen

Toyota Vios front windscreen

3) Next step is to peel off the 3M protective tape on the car mounting bracket and attach the DrivePro 200 on the windscreen after we have defined the right position for the unit.

Peel off the 3M protective tape on car mounting racket

Peel off the 3M protective tape on car mounting racket

DrivePro 200 with the car mounting bracket

DrivePro 200 with the car mounting bracket

Affix the DrivePro 200 with the car mounting bracket on the car windscreen

Affix the DrivePro 200 with the car mounting bracket on the car windscreen

4) The DrivePro 200 should be able to be removed from the car mounting bracket without causing the car mounting bracket dropped from the car windscreen.

car mounting bracket on the car windscreen

car mounting bracket on the car windscreen

5) Once we had affixed the DrivePro 200 on the car windscreen, next step is to start align the wiring from the DrivePro 200 to the windscreen sideline and sip into it as below images:

DrivePro 200 wiring alignment

DrivePro 200 wiring alignment

sip in the DrivePro 200 wiring into the car windscreen cover

sip in the DrivePro 200 wiring into the car windscreen cover

sip in the DrivePro 200 wiring into the car windscreen cover 2

sip in the DrivePro 200 wiring into the car windscreen cover 2

sip in the DrivePro 200 wiring into the car windscreen cover 3

sip in the DrivePro 200 wiring into the car windscreen cover 3

6) After secured the DrivePro 200 wiring into the car windscreen top cover, next step is to sip in the wire in the side cover as below as below images:

sip in the DrivePro 200 wire into the side cover

sip in the DrivePro 200 wire into the side cover

7) After we sipped the DrivePro 200 wire through the side cover, thenwe sip in the DrivePro 200 wiring into the rubber lining as below:

sip in the DrivePro 200 wire into the side cover rubber lining

sip in the DrivePro 200 wire into the side cover rubber lining

DrivePro 200 wiring under the rubber lining

DrivePro 200 wiring under the rubber lining

8) Sip the DrivePro 200 wire into the rubber lining and also into the bottom side cover as below:

DrivePro 200 wire under the rubber lining

DrivePro 200 wire under the rubber lining

DrivePro 200 wire under the rubber lining 2

DrivePro 200 wire under the rubber lining 2

DrivePro 200 wire under the bottom side cover

DrivePro 200 wire under the bottom side cover

9) Next step is align the DrivePro 200 wire under the steering cover. Here is the tricky part, where we have to locate the ‘hook’ behind the cover to hang the wiring on it:

DrivePro 200 wiring under the interior cover

DrivePro 200 wiring under the interior cover

hang the DrivePro 200 wire under the cover on the 'hook'

hang the DrivePro 200 wire under the cover on the ‘hook’

hang the DrivePro 200 wire under the cover

hang the DrivePro 200 wire under the cover

hang the DrivePro 200 wire under the cover 2

hang the DrivePro 200 wire under the cover 2

10) We are almost done, next is we sip in the DrivePro 200 wiring into dashboard cover. There is a ‘hook’ behind the cover as well, user can hang the wire behind the cover below:

Align the DrivePro 200 wiring to the 12V socket

Align the DrivePro 200 wiring to the 12V socket

11) Next step is we connect the DrivePro 200 socket to the 12V car socket as below photo:

Align the DrivePro 200 wiring to the 12V socket

Align the DrivePro 200 wiring to the 12V socket

12) Tide up the excess lengthy DrivePro 200 wire once the wiring setup is completed and sip it between the seat and handbrake compartment:

tide up the excess wire

tide up the excess wire

We have completed the DIY DrivePro 200 installation and it is done in the neat way!

DrivePro 200 in the Toyota Vios

DrivePro 200 in the Toyota Vios

DrivePro 200 in the Toyota Vios 2

DrivePro 200 in the Toyota Vios 2

DrivePro 200 in the Toyota Vios night view

DrivePro 200 in the Toyota Vios night view

Transcend DrivePro 200 in Toyota Vios

Transcend DrivePro 200 in Toyota Vios

Check out the Transcend DrivePro 200 Review & Footage too!

Let me know if you have any query, and don’t forget to give us a ‘LIKE’ at bottom 🙂

COOL People Love to Share:

10 thoughts on “Car Video Recorder Transcend DrivePro 200 DIY Installation”

  1. colin lim says:

    Hi Kelvin,
    Mine telling me, when you off your Vios Car engine do you unplug the cigarette charger?
    Will the car dash cam cigarette charger adapter drain car battery?

    1. Kelvin Ang says:

      Hi Colin,
      I never unplug the cigarette charger from the plug. The plug would not produce any electricity when the car is turned OFF.

      Don’t worry 🙂

  2. Hildegarde says:

    I’ve recently started a website, the info yoou offer on this
    website has helped me tremendously. Thanks ffor all of your time & work.

  3. Up Skin says:

    If you want to get much from this post then you have to apply such methods to your won blog.

  4. Yes! Finally someone writes about vmware workstation 10 clipboard.

  5. Nice post. I learn something totally new and challenging
    on blogs I stumbleupon every day. It will always be exciting to read through
    content from other authors and practice something from their websites.

  6. Good information. Lucky me I came across your blog by chance (stumbleupon).

    I’ve saved it for later!

  7. super nitro says:

    You’re so cool! I don’t think I have read anything like this before.
    So nice to find someone with original thoughts on this topic.

    Really.. thanks for starting this up. This web site is one thing that is required on the internet, someone with
    some originality!

  8. Thanks for sharing your thoughts on 12v socket.
    Regards

  9. I am regular reader, how are you everybody? This article posted at this web page is really
    pleasant.

Leave a Reply to colin lim Cancel reply

Your email address will not be published. Required fields are marked *